Giuseppe Desirò cap assembly machines can assemble multiple-piece closing mechanisms at variable piece/minute speeds, based on the size and shape of the cap. The Giuseppe Desirò Srl team makes every effort to provide made-to-measure automatic cap assembly machines with an excellent quality/price ratio. Our added value is represented by the performance and precision of every single design and production, which combine together to guaranty full customer satisfaction.
Visit our YouTube channel
The GD12 series are automatic machines for inserting the gasket disk cut from the reel in the IHS and Pressure Sensitive versions, into the capsule. Maximum productivity 100 Pcs/min.
Laser marking of two notches with value on the TIGE, 25 mg and 50 mg. Visual inspection of the marking: characters and height control of the notches.
The GD21WY is an automatic machine to couple aluminum capsules with plastic disks by heat shrinking the internal lip of the disk. The entire cycle is controlled by the PLC and the electronics on board the machine.
The operator is kept constantly informed of the machine status by the HMI and the touch screen panel.
The GD112/12 is an intermittent cycle machine for blanking a hole in the piston of the syringe. It reaches at a speed of 2000 pcs. per minute working 12 components at the same time. The cycle is entirely managed by the PLC and the on-board electronics, the operator is continuously informed on the operating status of the machine from the control panel display with touch screen technology.
The GD74 machine is designed to work independently and continuously on the assembly of polymeric parts. The individual components are oriented by the feeders and transported to the machine by belts, air conveyors and linear vibrators. The screws are oriented and inserted into the positions of the main plate, followed by the insertion of the clip, the insertion of the oriented body, the insertion of the cursor and the ring nut.
GD33/RV is a new generation, automatic machine for the assembly of two screw-on components for plastic closing mechanisms to be used for cooking oil containers.
The assembly machine includes two supply lines for the cap and for the spout, composed of an elevator with a 500 liter capacity and a centrifugal dispenser to orient the component to be assembled. The machine manages 6 assembly stations driven by stepper motors. The outfeed satellite plate for the caps to be assembled includes a quality control device to reject defective pieces. The outfeed belt is equipped with a terminal, dual channel diverter for continuous-cycle packing of up to four boxes.
The GD33 R3 is a rotary machine for assembling CRC28 capsules which are made up of 3 components: the plug, the inner (or internal capsule) and the outer (or external capsule). The assembly takes place in two stages: the insertion of the plug into the inner in the first carousel and the assembly of it with the outer in the second carousel. It can also assemble the inner, already provided with liner, with the outer: in this case the plug power line is disconnected and the first carousel is only used to pass the inner ones.
GD5/F3 is an intermittent machine that processes three caps at a time to fold the TE ring of the cap. Furthermore, the machine is equipped with three visions systems for a detailed inspection of the molding of the closure and the integrity of the connection points of the safety rings.
The GD33/12X is an automatic machine to assembly closures for liquid product containers. The cap is designed to be child-proof, and therefore unscrewing the cap to gain access to the product requires a certain level of manual dexterity and strength.
The work cycle of the GD33/12X machine starts by boring the inside capsule (safety vent), followed by cutting the sealing disk from the tape (Ring Peel Liner) and inserting it into the internal cap. The final stage is the assembly of the internal cap into the outer cap, pressing and punching the outer ring.
Automatic assembly machine for two-component, pharmaceutical closures.
The GD 21/WY automatic machine is a continuous rotary welding machine with 32 heads, to heat-seal aluminum caps with flip-off plastic disks, with 13/20/28/32 mm diameters.
Production output up to 1000 pcs/min.
The GD77 is an automatic assembly machine for dispensers and spray spouts with up to 5 components, equipped with interchangeable tools for format changes. Production output up to 60 pcs/min.